Product overview Tool modules

24 Products

Screwdriver set TX in the 3/3 foam module, 6 pieces

Item no.: R22150015

  • Blades of high-grade chrome-molybdenum steel, chrome-plated
  • Driven tips phosphated, corrosion-protected and low-wear
  • Moulded handles form a firm unit with the blades
  • 2 dual-material handles for a hands-friendly transfer of force
  • 5-edge handle heads stop them rolling off when put down
  • Elongated holes in the handle for hanging up
  • In the foam module

Socket set 1/4" in the 3/3 foam module, 37 pieces

Item no.: R22150006

  • Coupler based on DIN 3120 - A 6.3, ISO 1174, with ball lock
  • Square drive as per DIN 3120 - C 6.3, ISO 1174, with ball retention groove
  • 2C reversible ratchet 1/4": Lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-material handle
  • Square plug-in handle 1/4": 1-component handle with in-hex
  • Socket 1/4" hexagon: Metric, short, to DIN 3124, ISO 2725
  • Screwdriver bit socket 1/4" for in-hex screws: Pressed-in, phosphated pin
  • Screwdriver bit socket 1/4" slotted: Pressed-in, phosphated pin
  • Screwdriver bit socket 1/4" PZ: Pressed-in, phosphated pin
  • Screwdriver bit socket 1/4" PZ: Pressed-in, phosphated pin
  • Screwdriver bit socket 1/4" TX with drill hole: Pressed-in, phosphated pin
  • Socket extension 1/4":
  • Sliding T-handle with slide 1/4": Acc. to DIN 3122, ISO 3315
  • Universal joint 1/4": Joint bolted on, design to DIN 3123 - C 6.3
  • Chrome-vanadium steel, matt satin chrome-plated
  • For hand-operated bolting operations
  • In the foam module

Double-ended ring spanner set in the 3/3 foam module, 8 pieces

Item no.: R22150000

  • Acc. to DIN 838, ISO 3318, ISO 1085, ISO 10104
  • 5° offset
  • Thin walled rings
  • Chrome-vanadium steel
  • Matt satin chrome-plated finish
  • In the foam module

Combination spanner set and hexagon socket key set in the 3/3 foam module, 26 pieces

Item no.: R22250000

  • Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15° jaw position, surface matt satin, chrome-plated
  • Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated
  • Chrome-vanadium steel
  • In the foam module

Screwdriver bit socket set 1/2" in the 3/3 foam module, 15 pieces

Item no.: R22150011

  • Square drive acc. to DIN 3120, ISO 1174, with ball retention groove
  • Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin
  • Chrome-vanadium steel, matt satin chrome-plated
  • For hand-operated bolting operations
  • In the foam module

Ratchet wrench and double open-ended spanner set in the 3/3 foam module, 22 pieces

Item no.: R22350006

  • Ratchet wrenches: Based on DN 3113, ISO 3318, straight, 72-toothed ratchet mechanism, 5° working angle, 15° jaw position, surface matt satin plate-chromed, chrome-vanadium steel
  • Double open-ended spanner: To DIN 3110, ISO 3318, ISO 1085, ISO 10102, 15° jaw position, surface matt satin chrome-plated, chrome-vanadium steel

Impact socket set 1/2" in the 3/3 foam module, 14 pieces

Item no.: R22150012

  • Square drive as per DIN 3121 - G 12.5, ISO 1174
  • Acc. to DIN 3129, ISO 2725-2
  • Machine-operated, fixing with safety ring / pin
  • Surface phosphated
  • Chrome-molybdenum steel
  • In the foam module

Hammer and chisel set in the 3/3 foam module, 7 pieces

Item no.: R22150019

  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
  • Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel
  • Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel
  • Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel
  • Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel
  • In the foam module

Ratchet wrench and hexagon socket key set in the 3/3 foam module, 24 pieces

Item no.: R22250001

  • Ratchet wrenches: Based on DIN 3113, ISO 3318, ring offset 15°, reversible for right and left-hand operation, 15° jaw position, surface matt satin chrome-plated
  • Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated
  • Chrome-vanadium steel
  • In the foam module

Socket set 1/4” + 1/2" and accessories in the 3/3 foam module, 87 pieces

Item no.: R22350000

  • Coupler in acc. with DIN 3120, ISO 1174, with ball locking device
  • Square drive acc. to DIN 3120, ISO 1174, with ball retention groove
  • 2C Reversible ratchet: Lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-material handle, hands-friendly transfer of force, for sockets
  • Square plug-in handle 1/4": 1-component handle with in-hex
  • Socket 1/4” + 1/2": hex, metric, short and long type based on DIN 3124, ISO 2725
  • Spark plug socket 1/2" with pressed-in holding rubber
  • Spark plug socket 1/2" with pressed-in holding rubber and additional drive hex AF 24
  • Screwdriver bit socket 1/4” + 1/2" for in-hex screws: Pressed-in, phosphated pin
  • Screwdriver bit socket 1/4" slotted: Pressed-in, phosphated pin
  • Screwdriver bit socket 1/4" PZ: Pressed-in, phosphated pin
  • Screwdriver bit socket 1/4" PZ: Pressed-in, phosphated pin
  • Screwdriver bit socket 1/4" TX with drill hole: Pressed-in, phosphated pin
  • Sliding T-handle with slide 1/4” + 1/2”: Acc. to DIN 3122, ISO 3315
  • Socket extension 1/4"+ 1/2"
  • Universal joint 1/4" + 1/2": Joint bolted on, design to DIN 3123 - C 12.5
  • Adjustable spanner: 15° jaw position, polished head with lasered scale
  • For hand-operated bolting operations
  • Chrome-vanadium steel, matt satin chrome-plated

Screwdriver set in the 3/3 foam module, 6 pieces

Item no.: R22150014

  • Blades of high-grade chrome-molybdenum steel, chrome-plated
  • Driven tips phosphated, corrosion-protected and low-wear
  • Moulded handles form a firm unit with the blades
  • 2 dual-material handles for a hands-friendly transfer of force
  • 5-edge handle heads stop them rolling off when put down
  • Elongated holes in the handle for hanging up
  • In the foam module

Pliers set in the 3/3 foam module, 4 pieces

Item no.: R22150018

  • Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
  • Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, dual-material handle, forged
  • Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, forged
  • Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, forged
  • In the foam module

Ratchet with accessories 1/2'' in the 3/3 foam module, 5 pieces

Item no.: R22150008

  • Coupler in acc. with DIN 3120, ISO 1174, with ball locking device
  • Square drive acc. to DIN 3120, ISO 1174, with ball retention groove
  • 2C reversible ratchet 1/2": To DIN 3120 - A 12.5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, dual-material handle
  • Socket extension 1/2":
  • Universal joint 1/2": Joint bolted on, design to DIN 3123 - C 12.5
  • Chrome-vanadium steel, matt satin chrome-plated
  • For hand-operated bolting operations
  • In the foam module

Measuring and cutting tools set in the 3/3 foam module, 30 pieces

Item no.: R22350004

  • Multifunction saw: Rotating saw blade and frame, hand protector, dual-material handle, delivered with HSS bi-metal saw blade (24 tpi)
  • Digital measuring calliper: LCD display, reset setting, precision roller adjustment, mm/inch changeover, ground tips, in box incl. spare battery, operating instructions, PC interface, locking screw, thread table on the back
  • Heavy-duty utility knife: Multi-component handle, aluminium, rapid-change mechanism, 1 trapezoid blade and 4 spare trapezoid blades, rugged design
  • Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II
  • (De)magnetizer: Magnetizer for bolting and gripping tools, demagnetizer for tools
  • Spirit level: Smooth aluminium rectangular profile, two acrylic vials, measurement accuracy: +/- 0.5 mm/m, powder-coated, impact-resistant end cap
  • Wood sectioned folding ruler: Metric dual scale, Accuracy Class III, EC-design approval for continuous mm division, beech wood with through-riveted joints
  • Blue pencil: Oval form
  • Carbide scriber: Pencil and carbide scriber in one, straight form, retractable nib, metal housing, attaching clip
  • LED torch: Aluminium housing, batteries (3x AAA) supplied, loop, 2 brightness settings and additional warning/signal function, 1 W LED, 55-60 lm luminous flux, 25-30 m light range, subject to technical changes

Ratchet wrench set in the 3/3 foam module, 9 pieces

Item no.: R22150002

  • Based on DIN 3113, ISO 3318
  • Ring offset to 15°, reversible for right and left hand operation
  • Jaw set at 15°
  • Matt satin chrome-plated finish
  • Chrome-vanadium steel
  • In the foam module

Screwdriver set in the 3/3 foam module, 6 pieces

Item no.: R22150013

  • Blades of high-grade chrome-molybdenum steel, chrome-plated
  • Driven tips phosphated, corrosion-protected and low-wear
  • Moulded handles form a firm unit with the blades
  • 2 dual-material handles for a hands-friendly transfer of force
  • 5-edge handle heads stop them rolling off when put down
  • Elongated holes in the handle for hanging up
  • In the foam module

Screwdriver and file set in the 3/3 foam module, 26 pieces

Item no.: R22350002

  • 2C screwdriver slotted: To DIN 5264, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, hands-friendly transfer of force, 5-edge grip head, elongated hole in handle
  • 2C screwdriver PH: To DIN 8764, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • 2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • Phase tester: Max. 250 volt, black gun-metal tip, red plastic jacket, anti-slip handle surface, synthetic clip, to DIN 0680-6:1977-04
  • Bit screwdriver: Dual-material handle, hex recess drive to DIN 3126 - D 6.3 (1/4") for bits, magnet, elongated hole in the handle, chrome-vanadium steel
  • Hexagon socket key set: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder
  • Files: To DIN 7261, dual-material handle, file-cut 2, file length 200 mm, total length 310 mm, hole for hanging up

Pliers, hammer, chisel set in the 3/3 foam module, 29 pieces

Item no.: R22350001

  • Bent nose telephone pliers, straight: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel
  • Internal circlip pliers, straight and angled: To DIN 5256, precision tips, DIN 472 for retaining rings, DIN 984, dip-insulated handles, chrome vanadium steel
  • External circlip pliers, straight and angled: To DIN 5254, precision tips, DIN 471 for retaining rings, DIN 983, dipped handle protectors, chrome vanadium steel
  • Clamp locking plier: Lengthways-serrated grip surfaces, setting screw and release lever, one-hand operation, surface chrome-plated, chrome vanadium steel
  • Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edge, dual-material handle, special tool steel, forged
  • Water pump pliers: To DIN 8976, lengthways-serrated grip surfaces, box joint, 7 settings, head and box polished, chrome-vanadium steel, powder-coated
  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Flat chisel: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
  • Cross-cut chisel: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel
  • Centre punch: To DIN 7250, impact end annealed, chrome-vanadium steel
  • Pin punch: To DIN 6450, impact end annealed, chrome-vanadium steel
  • Feeler gauge set: Protective handle, folding, blades tapering to a cone, of hardened spring steel

Screwdriver, pliers, hammer and chisel set in the 3/3 foam module, 23 pieces

Item no.: R22350005

  • Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel
  • Bent nose telephone pliers, straight: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
  • 2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • 2C screwdriver TX: High-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Flat chisel: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
  • Cross-cut chisel: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel
  • Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel
  • Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel
  • Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel

VDE Screwdriver set in the 3/3 foam module, 6 pieces

Item no.: R22150016

  • For slotted head screws: Acc. to DIN 5264, DIN ISO 2380
  • For cross-head screws PH: Acc. to DIN 7438, DIN ISO 8764
  • VDE-insulated acc. to DIN EN 60900
  • Guaranteed protection for working under voltage up to 1000V AC (alternating current) and 1500V DC (direct current)
  • Blade of high-grade chrome-molybdenum steel
  • Driven tip phosphated, corrosion-protected and low-wear
  • Dual-material handle, for easy handling
  • Moulded handle forms a firm unit with the blade
  • 5-edge handle head stops it rolling off when put down
  • Elongated hole in the handle for hanging up
  • In the foam module
Our catalogue