Product overview Tool Assortments

14 Products

Universal set SCHRAUBER in tool case, 57 pieces

Item no.: R21650057

  • Socket wrench tools:
  • Coupler in acc. with DIN 3120, ISO 1174, with ball locking device
  • Square drive acc. to DIN 3120, ISO 1174, with ball retention groove
  • 2C reversible ratchet, lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-meterial handle, hands-friendliy transfer of force, for sockets
  • Socket 1/2", hex, metric, short design based on DIN 3124, ISO 2725
  • Spark plug socket 1/2" with pressed-in holding rubber
  • Spark plug socket 1/2" with pressed-in holding rubber an dadditional drive 24 mm
  • Socket extenstion 1/2"
  • Universal joint 1/2", joint bolted on, design to DIN 3123 - C12,5
  • For hand-operated bolting operations
  • Chrome-vanadium-steel, matt satin chrome-plated
  • Holding rail, for equipping with adaptors for 1/2" sockets, aluminium
  • Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15° jaw position, surface matt satin, plate-chromed, chrome-vanadium steel
  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel
  • 2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • Hexagon socket key: To DIN, hardened throughout, chrome-vanadium steel, phosphated, in holder
  • Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
  • Phase tester: Max. 250 volt, 1-component handle, transparent plastic, metal clip
  • Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II

Tool set in foam modules, 129 pieces

Item no.: R21010004

  • Socket wrench tools:
  • Coupler in acc. with DIN 3120, ISO 1174, with ball locking device
  • Square drive acc. to DIN 3120, ISO 1174, with ball retention groove
  • 2C reversible ratchet, lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-meterial handle, hands-friendliy transfer of force, for sockets
  • Square plug-in handle 1/4": 1-component handle with in-hex
  • Socket 1/4" + 1/2": hex, metric, short design based on DIN 3124, ISO 2725
  • Spark plug socket 1/2" with pressed-in holding rubber
  • Spark plug socket 1/2" with pressed-in holding rubber an dadditional drive 24 mm
  • Screwdriver bit socket 1/4" + 1/2" for in-hex screws: pressed-in, phosphated pin
  • Screwdriver bit socket 1/4" slotted, PH, PZ, TX with drill hole: pressed-in, phosphated pin
  • Sliding T-handle with slide 1/4" + 1/2", acc. to DIN 3122, ISO 3315
  • Socket extenstion 1/4"+ 1/2"
  • Universal joint 1/4"+ 1/2", joint bolted on, design to DIN 3123 - C12,5
  • Adjustable spanner: 15° jaw position, polished head with laserd scale
  • Chrome-vanadium-steel, matt satin chrome-plated
  • Ratched wrenches: Based on DIN 3113, ISO 3318, straight, 72-toothed ratched mechanism, 5° working angle, 15° jaw position, surface matt satin plate-chromed, chrome-vanadium steel
  • Double open-ended spanner: To DIN 3110, ISO 3318, ISO 1085, ISO 10102, 15° jaw position, surface matt satin plate-chromed, chrome-vanadium steel
  • Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel
  • Bent nose telephone pliers, straight: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
  • 2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • 2C screwdriver TX: High-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Flat chisel: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
  • Cross-cut chisel: To DIN 6451, cutting edge, sides an head ground, impact and tempered, chorme-vanadium steel
  • Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel
  • Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel
  • Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel

Special set ELECTRO-TECHNICS 42 pieces, loose

Item no.: R21000042

  • Double open-ended spanner: To DIN 3110, ISO 3318, ISO 1085, ISO 10102, 15° jaw position, surface matt satin plate-chromed, chrome-vanadium steel
  • VDE Combination pliers: To DIN ISO 5746, meets requirements of VDE 0682 Part 201 and EN/EC 60900, with gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • VDE power side cutter: To DIN ISO 5749, meets requirements of VDE 0682 Part 201 and EN/EC 60900 high cutting performance, slim head form, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • VDE Bent nose telephone pliers, angled: To DIN ISO 5745, meets requirements of VDE 0682 Part 201 and EN/EC 60900, 45°-angled gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, forged
  • VDE Cable knife: VDE-insulated to DIN EN 60900, stable, partially insulated and replaceable blade, straight cutting edge, protective cap, safety handle of impact-resistant plastic
  • VDE screwdriver slotted and cross-slotted PH, VDE-insulated in acc. with DIN EN 60900, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder
  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Club hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 6475, ash handle, paint-coated shaft end, ring wedge
  • Flat chisel: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
  • Electrician’s chisel, square: Cutting edge and head ground, impact end annealed, chrome-vanadium steel
  • Point chisel, octagonal: To DIN 7256, cutting edge and head ground, impact end tempered, chrome-vanadium steel
  • Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel
  • Phase tester: Max. 250 volt, black gun-metal tip, red plastic jacket, anti-slip handle surface, synthetic clip, to DIN 0680-6:1977-04
  • Wood sectioned folding ruler Metric dual scale, Accuracy Class III, EC-design approval for continuous mm division, beech wood with through-riveted joints
  • Carbide scriber: Pencil and carbide scriber in one, straight form, retractable nib, metal housing, attaching clip
  • Voltage tester: To DIN ISO 0680, 8 LED displays, DC and AC measurement, Protection classification IP65
  • Spirit level: Smooth aluminium rectangular profile, two acrylic vials, measurement accuracy: +/- 0.5 mm/m, powder-coated, impact-resistant end cap
  • Scraper: For minor improvements/repairs, wooden handle, with hanging-up hole
  • Blue pencil: Oval form

Tool set in foam modules, 81 pieces

Item no.: R21010000

  • Socket wrench tools:
  • Coupler in acc. with DIN 3120, ISO 1174, with ball locking device
  • Square drive acc. to DIN 3120, ISO 1174, with ball retention groove
  • 2C reversible ratchet, lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-meterial handle, hands-friendliy transfer of force, for sockets
  • Socket extenstion 1/2"
  • Sliding T-handle with slide 1/2", acc. to DIN 3122, ISO 3315
  • Universal joint 1/2", joint bolted on, design to DIN 3123 - C12,5
  • Chrome-vanadium-steel, matt satin chrome-plated
  • Square drive acc. to DIN 3120, ISO 1174, with ball retention groove
  • Socket, hex: Metric, short, to DIN 3124, ISO 2725
  • Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin
  • Chrome-vanadium steel, matt satin chrome-plated
  • For hand-operated bolting operations
  • Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15° jaw position, surface matt satin, plate-chromed
  • Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated
  • Chrome-vanadium steel
  • Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
  • Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, dual-material handle, forged
  • Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, forged
  • Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, forged
  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
  • Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel
  • Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel
  • Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel
  • Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel
  • 2C screwdriver slotted and PH: To DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • 2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • Utility knife: Blade 25 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades

Universal set BASIC in the tool case, 72 pieces

Item no.: R21650072

  • Multifunction saw: Rotating saw blade and frame, hand protector, dual-material handle, delivered with HSS bi-metal saw blade (24 tpi)
  • Spirit level: Smooth aluminium rectangular profile, two acrylic vials, measurement accuracy: +/- 0.5 mm/m, powder-coated, impact-resistant end cap
  • Double open-ended spanner: To DIN 3110, ISO 3318, ISO 1085, ISO 10102, 15° jaw position, surface matt satin plate-chromed, chrome-vanadium steel
  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • Power side cutter: To DIN ISO 5749, high degree of cutting performance, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel
  • Pincer: To DIN ISO 9243, head ground, inductively hardened cutting edges, dipped handle covers, forged
  • Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II
  • Blue pencil: Oval form
  • 2C screwdriver: PZ slot and cross-slotted, acc. to DIN and VDE screwdriver slot and cross-slotted PH, VDE-insulated acc. to DIN EN 60900, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder
  • Flat chisel: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
  • Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
  • Phase tester: Max. 250 volt, black gun-metal tip, red plastic jacket, anti-slip handle surface, synthetic clip, to DIN 0680-6:1977-04
  • VDE Cable knife: VDE-insulated to DIN EN 60900, strong straight blade, straight cutting edge, protective cap, dual-material handle, hands-friendly transfer of force
  • Half-round file: To DIN 7261, dual-material handle, hands-friendly transfer of force, hole for hanging up
  • Utility knife: Blade 18 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades (100mm long, 0.4mm thick), with sharpener
  • Adjustable spanner: 15° jaw position, polished head with lasered scale, 40-50 HRC, chrome-vanadium steel, chrome-plated
  • Bit box: Drive adapter with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box
  • Bit screwdriver: Dual-material handle, hex recess drive to DIN 3126 - D 6.3 (1/4") for bits, magnet, elongated hole in the handle, chrome-vanadium steel

Universal set BASIC 72 pieces

Item no.: R21000072

  • Multifunction saw: Rotating saw blade and frame, hand protector, dual-material handle, delivered with HSS bi-metal saw blade (24 tpi)
  • Spirit level: Smooth aluminium rectangular profile, two acrylic vials, measurement accuracy: +/- 0.5 mm/m, powder-coated, impact-resistant end cap
  • Double open-ended spanner: To DIN 3110, ISO 3318, ISO 1085, ISO 10102, 15° jaw position, surface matt satin plate-chromed, chrome-vanadium steel
  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • Power side cutter: To DIN ISO 5749, high degree of cutting performance, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel
  • Pincer: To DIN ISO 9243, head ground, inductively hardened cutting edges, dipped handle covers, forged
  • Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II
  • Blue pencil: Oval form
  • 2C screwdriver: PZ slot and cross-slotted, acc. to DIN and VDE screwdriver slot and cross-slotted PH, VDE-insulated acc. to DIN EN 60900, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder
  • Flat chisel: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
  • Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
  • Phase tester: Max. 250 volt, black gun-metal tip, red plastic jacket, anti-slip handle surface, synthetic clip, to DIN 0680-6:1977-04
  • VDE Cable knife: VDE-insulated to DIN EN 60900, strong straight blade, straight cutting edge, protective cap, dual-material handle, hands-friendly transfer of force
  • Half-round file: To DIN 7261, dual-material handle, hands-friendly transfer of force, hole for hanging up
  • Utility knife: Blade 18 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades (100mm long, 0.4mm thick), with sharpener
  • Adjustable spanner: 15° jaw position, polished head with lasered scale, 40-50 HRC, chrome-vanadium steel, chrome-plated
  • Bit box: Drive adapter with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box
  • Bit screwdriver: Dual-material handle, hex recess drive to DIN 3126 - D 6.3 (1/4") for bits, magnet, elongated hole in the handle, chrome-vanadium steel

Universal set ALL-IN 108 pieces

Item no.: R21000108

  • Socket wrench tools:
  • Coupler in acc. with DIN 3120, ISO 1174, with ball locking device
  • Square drive acc. to DIN 3120, ISO 1174, with ball retention groove
  • 2C reversible ratchet, lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-meterial handle, hands-friendliy transfer of force, for sockets
  • Socket 1/2", hex, metric, short design based on DIN 3124, ISO 2725
  • Socket extenstion
  • Universal joint 1/2", joint bolted on, design to DIN 3123 - C12,5
  • For hand-operated bolting operations
  • Chrome-vanadium-steel, matt satin chrome-plated
  • Holding rail, for equipping with adaptors for 1/2" sockets, aluminium
  • Ratchet wrench, metric: Based on DN 3113, ISO 3318, straight, 15° jaw position, surface matt satin plate-chromed, chrome-vanadium steel
  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • Power side cutter: To DIN ISO 5749, high degree of cutting performance, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel
  • Bent nose telephone pliers, straight: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II
  • 2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder
  • Flat chisel: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
  • Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
  • Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel
  • Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel
  • Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel
  • Utility knife: Blade 18 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades (100mm long, 0.4mm thick), with sharpener
  • Bit box: Drive adapter with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box
  • Bit screwdriver: Dual-material handle, hex recess drive to DIN 3126 - D 6.3 (1/4") for bits, magnet, elongated hole in the handle, chrome-vanadium steel

Tool set in foam modules, 119 pieces

Item no.: R21010001

  • Socket wrench tools:
  • Coupler in acc. with DIN 3120, ISO 1174, with ball locking device
  • Square drive acc. to DIN 3120, ISO 1174, with ball retention groove
  • Chrome-vanadium-steel, matt satin chrome-plated
  • 2C reversible ratchet 1/4": To DIN 3120 - A 6.3, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, dual-material handle
  • Square plug-in handle 1/4": 1-component handle with in-hex
  • Socket 1/4" hexagon: Metric, short, to DIN 3124, ISO 2725
  • Screwdriver bit socket 1/4" for in-hex screws: Pressed-in, phosphated pin
  • Screwdriver bit socket 1/4" slotted, PH, PZ, TX with drill hole: Pressed-in, phosphated pin
  • Socket extension 1/4"
  • Sliding T-handle with slide 1/4": Acc. to DIN 3122, ISO 3315
  • Universal joint 1/4": Joint bolted on, design to DIN 3123 - C 6.3
  • 2C reversible ratchet 1/2": To DIN 3120 - A 12.5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, dual-material handle
  • Socket extension 1/2":
  • Sliding T bar 1/2", with slide, to DIN 3122, ISO 3315
  • Universal joint 1/2": Joint bolted on, design to DIN 3123 - C 12.5
  • Socket, hex: Metric, short, to DIN 3124, ISO 2725
  • Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin
  • Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15° jaw position, surface matt satin, chrome-plated
  • Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated
  • Chrome-vanadium steel
  • Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
  • Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, dual-material handle, forged
  • Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, forged
  • Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, forged
  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
  • Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel
  • Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel
  • Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel
  • Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel
  • 2C screwdriver slotted and PH: To DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • 2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II
  • Utility knife: Blade 25 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades

Universal set SCHRAUBER 57 pieces

Item no.: R21000057

  • Socket wrench tools:
  • Coupler in acc. with DIN 3120, ISO 1174, with ball locking device
  • Square drive acc. to DIN 3120, ISO 1174, with ball retention groove
  • 2C reversible ratchet, lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-meterial handle, hands-friendliy transfer of force, for sockets
  • Socket 1/2", hex, metric, short design based on DIN 3124, ISO 2725
  • Spark plug socket 1/2" with pressed-in holding rubber
  • Spark plug socket 1/2" with pressed-in holding rubber an dadditional drive 24 mm
  • Socket extenstion 1/2"
  • Universal joint 1/2", joint bolted on, design to DIN 3123 - C12,5
  • For hand-operated bolting operations
  • Chrome-vanadium-steel, matt satin chrome-plated
  • Holding rail, for equipping with adaptors for 1/2" sockets, aluminium
  • Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15° jaw position, surface matt satin, plate-chromed, chrome-vanadium steel
  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel
  • 2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • Hexagon socket key: To DIN, hardened throughout, chrome-vanadium steel, phosphated, in holder
  • Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
  • Phase tester: Max. 250 volt, 1-component handle, transparent plastic, metal clip
  • Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II

Tool set in foam modules, 166 pieces

Item no.: R21010002

  • Socket wrench tools:
  • Coupler in acc. with DIN 3120, ISO 1174, with ball locking device
  • Square drive acc. to DIN 3120, ISO 1174, with ball retention groove
  • Chrome-vanadium-steel, matt satin chrome-plated
  • 2C reversible ratchet 1/4": To DIN 3120 - A 6.3, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, dual-material handle
  • Square plug-in handle 1/4": 1-component handle with in-hex
  • Socket 1/4" hexagon: Metric, short, to DIN 3124, ISO 2725
  • Screwdriver bit socket 1/4" for in-hex screws: Pressed-in, phosphated pin
  • Screwdriver bit socket 1/4" slotted, PH, PZ, TX with drill hole: Pressed-in, phosphated pin
  • Socket extension 1/4":
  • Sliding T-handle with slide 1/4": Acc. to DIN 3122, ISO 3315
  • Universal joint 1/4": Joint bolted on, design to DIN 3123 - C 6.3
  • 2C reversible ratchet 1/2": To DIN 3120 - A 12.5, ISO 1174, lever for right and left-hand operation, push button release, fine-toothed, oval form, dual-material handle
  • Socket extension 1/2":
  • Sliding T bar 1/2", with slide, to DIN 3122, ISO 3315
  • Universal joint 1/2": Joint bolted on, design to DIN 3123 - C 12.5
  • Socket, hex: Metric, short, to DIN 3124, ISO 2725
  • Screwdriver bit socket 1/2" for in-hex screws: Pressed-in, phosphated pin
  • Ratchet wrenches: Based on DIN 3113, ISO 3318, ring offset 15°, reversible for right and left-hand operation, 15° jaw position, surface matt satin chrome-plated
  • Hexagon socket key set: To DIN ISO 2936, hardened throughout, phosphated
  • Chrome-vanadium steel
  • Flat ring spanner: To DIN 838, ISO 3318, ISO 1085, ISO 10104, 5° offset, chrome vanadium steel, surface matt satin, chrome-plated
  • Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
  • Combination pliers: To DIN ISO 5746, inductively hardened cutting edges, dual-material handle, forged
  • Bent nose telephone pliers: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, forged
  • Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, forged
  • Circlip pliers: To DIN 5254 Form A, straight precision tips, opening spring, DIN 471 for retaining rings, DIN 983
  • To DIN 5254 Form B, angled precision tips, opening spring, DIN 471 for retaining rings, DIN 983
  • To DIN 5256 Form C, straight precision tips, opening spring, DIN 472 for retaining rings, DIN 984
  • To DIN 5256 Form D, 90° angled precision tips, DIN 472 for retaining rings, DIN 984
  • Dipped handle protectors
  • Chrome-vanadium steel
  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Flat cold chisel, flat oval: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
  • Cross-cut chisel, flat oval: To DIN 6451, cutting edge, sides and head ground, impact end tempered, chrome-vanadium steel
  • Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel
  • Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel
  • Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel
  • 2C screwdriver: Slot and cross-slotted PZ, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • 2C screwdriver TX: Chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • Digital measuring calliper: LCD display, reset setting, precision roller adjustment, mm/inch changeover, ground tips, in box incl. spare battery, operating instructions, PC interface, locking screw, thread table on the back
  • Clamp locking plier: Lengthways-serrated grip surfaces, setting screw and release lever, one-hand operation, surface chrome-plated, chrome vanadium steel
  • Half-round file: To DIN 7261, dual-material handle, hands-friendly transfer of force, hole for hanging up
  • Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II
  • Utility knife: Blade 25 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades
  • (De)magnetizer: Magnetizer for bolting and gripping tools, demagnetizer for tools
  • Feeler gauge set: Protective handle, folding, blades tapering to a cone, of hardened spring steel
  • Bit box: Drive adapter with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box

Universal set ALLROUND in tool case, 59 pieces

Item no.: R21650059

  • Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15° jaw position, surface matt satin, plate-chromed, chrome-vanadium steel
  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel
  • 2C screwdriver: Slot and cross-slotted PH, PZ , to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • Hexagon socket key: To DIN, hardened throughout, chrome-vanadium steel, phosphated, in holder
  • Flat and cross-cut chisel: To DIN, cutting edge and head ground, impact end tempered, chrome-vanadium steel
  • Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel
  • Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel
  • Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
  • Phase tester: Max. 250 volt, black gun-metal tip, red plastic jacket, anti-slip handle surface, synthetic clip, to DIN 0680-6:1977-04
  • Round and flat files: To DIN 7261, dual-material handle, hands-friendly transfer of force, hole for hanging up
  • Adjustable spanner: 15° jaw position, polished head with lasered scale, 40-50 HRC, chrome-vanadium steel, chrome-plated
  • Wood sectioned folding ruler Metric dual scale, Accuracy Class III, EC-design approval for continuous mm division, beech wood with through-riveted joints
  • Carbide scriber: Pencil and carbide scriber in one, straight form, retractable nib, metal housing, attaching clip

Universal set ALLROUND 59 pieces

Item no.: R21000059

  • Combination spanner: To DIN 3113, Form A ISO 3318, ISO 7738, ring side angled 15° jaw position, surface matt satin, plate-chromed, chrome-vanadium steel
  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • Side cutters: To DIN ISO 5749, slender head, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel
  • 2C screwdriver: Slot and cross-slotted PH, PZ , to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • Hexagon socket key: To DIN, hardened throughout, chrome-vanadium steel, phosphated, in holder
  • Flat and cross-cut chisel: To DIN, cutting edge and head ground, impact end tempered, chrome-vanadium steel
  • Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel
  • Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel
  • Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
  • Phase tester: Max. 250 volt, black gun-metal tip, red plastic jacket, anti-slip handle surface, synthetic clip, to DIN 0680-6:1977-04
  • Round and flat files: To DIN 7261, dual-material handle, hands-friendly transfer of force, hole for hanging up
  • Adjustable spanner: 15° jaw position, polished head with lasered scale, 40-50 HRC, chrome-vanadium steel, chrome-plated
  • Wood sectioned folding ruler Metric dual scale, Accuracy Class III, EC-design approval for continuous mm division, beech wood with through-riveted joints
  • Carbide scriber: Pencil and carbide scriber in one, straight form, retractable nib, metal housing, attaching clip

Universal set BASIC in the tool box, 72 pieces

Item no.: R21600072

  • Multifunction saw: Rotating saw blade and frame, hand protector, dual-material handle, delivered with HSS bi-metal saw blade (24 tpi)
  • Spirit level: Smooth aluminium rectangular profile, two acrylic vials, measurement accuracy: +/- 0.5 mm/m, powder-coated, impact-resistant end cap
  • Double open-ended spanner: To DIN 3110, ISO 3318, ISO 1085, ISO 10102, 15° jaw position, surface matt satin plate-chromed, chrome-vanadium steel
  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • Power side cutter: To DIN ISO 5749, high degree of cutting performance, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel
  • Pincer: To DIN ISO 9243, head ground, inductively hardened cutting edges, dipped handle covers, forged
  • Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II
  • Blue pencil: Oval form
  • 2C screwdriver: PZ slot and cross-slotted, acc. to DIN and VDE screwdriver slot and cross-slotted PH, VDE-insulated acc. to DIN EN 60900, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder
  • Flat chisel: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
  • Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
  • Phase tester: Max. 250 volt, black gun-metal tip, red plastic jacket, anti-slip handle surface, synthetic clip, to DIN 0680-6:1977-04
  • VDE Cable knife: VDE-insulated to DIN EN 60900, strong straight blade, straight cutting edge, protective cap, dual-material handle, hands-friendly transfer of force
  • Half-round file: To DIN 7261, dual-material handle, hands-friendly transfer of force, hole for hanging up
  • Utility knife: Blade 18 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades (100mm long, 0.4mm thick), with sharpener
  • Adjustable spanner: 15° jaw position, polished head with lasered scale, 40-50 HRC, chrome-vanadium steel, chrome-plated
  • Bit box: Drive adapter with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box
  • Bit screwdriver: Dual-material handle, hex recess drive to DIN 3126 - D 6.3 (1/4") for bits, magnet, elongated hole in the handle, chrome-vanadium steel

Universal set ALL-IN in tool case, 108 pieces

Item no.: R21650108

  • Socket wrench tools:
  • Coupler in acc. with DIN 3120, ISO 1174, with ball locking device
  • Square drive acc. to DIN 3120, ISO 1174, with ball retention groove
  • 2C reversible ratchet, lever for reversible right and left hand operation, push button release, fine-toothed, oval head, dual-meterial handle, hands-friendliy transfer of force, for sockets
  • Socket 1/2", hex, metric, short design based on DIN 3124, ISO 2725
  • Socket extenstion
  • Universal joint 1/2", joint bolted on, design to DIN 3123 - C12,5
  • For hand-operated bolting operations
  • Chrome-vanadium-steel, matt satin chrome-plated
  • Holding rail, for equipping with adaptors for 1/2" sockets, aluminium
  • Ratchet wrench, metric: Based on DN 3113, ISO 3318, straight, 15° jaw position, surface matt satin plate-chromed, chrome-vanadium steel
  • Engineers’ hammer: Forged hammer head of tempered steel, inductively hardened striking surfaces, to DIN 1041, ash handle, paint-coated shaft end, ring wedge
  • Combination pliers: To DIN ISO 5746, gripping zones for flat and round material, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • Power side cutter: To DIN ISO 5749, high degree of cutting performance, inductively hardened, long cutting edges, dual-material handle, chrome-vanadium steel
  • Bent nose telephone pliers, straight: To DIN ISO 5745, straight gripping surfaces, lengthways-serrated, inductively hardened cutting edges, dual-material handle, chrome-vanadium steel
  • Tape measure: ABS dual-material housing, clip, nylon-coated tape, mm-graduation, with tape rewind and lock, magnetic stop, Accuracy Class II
  • 2C screwdriver: Slot and cross-slotted PH, to DIN, high-grade chrome-molybdenum steel blade, chrome-plated, phosphated driven tip, dual-material handle, 5-edge grip head, elongated hole in handle
  • Hexagon socket key: To DIN ISO 2936, hardened throughout, chrome-vanadium steel, phosphated, in holder
  • Flat chisel: To DIN 6453, cutting edge and head ground, impact end tempered, chrome-vanadium steel
  • Water pump pliers: To DIN 8976 Form C, lengthways-serrated gripping surfaces, box joint, 7 settings, chrome vanadium steel, powder-coated
  • Hexagonal punch: To DIN 6458, impact end annealed, chrome-vanadium steel
  • Centre punch, hexagonal: To DIN 7250, impact end annealed, chrome-vanadium steel
  • Pin punch, octagonal: To DIN 6450, impact end annealed, chrome-vanadium steel
  • Utility knife: Blade 18 mm, synthetic housing, metal blade guide, one-handed operation, 5 spare blades (100mm long, 0.4mm thick), with sharpener
  • Bit box: Drive adapter with magnetic bit locking, hexagon drive to DIN 3126 ISO 1173 - C 6.3, machine operated, phosphated, plastic box
  • Bit screwdriver: Dual-material handle, hex recess drive to DIN 3126 - D 6.3 (1/4") for bits, magnet, elongated hole in the handle, chrome-vanadium steel
Our catalogue